Abstract

A major concern when installing the cables into the underground conduit is minimizing the tensile forces exerted on the cables as they are pulled. This knowledge makes it possible to avoid over conservative design practices and to achieve substantial saving during construction. A general computing algorithm of predicting the tensile force of the cable pulled through the underground conduit with an arbitrary configuration is presented in this paper, which is based on multibody system dynamic formulation. The presented multibody dynamic model for this problem consists of the cable, the underground conduit, and the interaction between the cable and the conduit. In this paper, the cable is modeled by the finite cable element based on an absolute nodal coordinate formulation. The interaction between the cable and the underground conduit is described by the Hertz contact theory. Numerical examples are presented to illustrate the effectiveness and efficiency of the proposed method for estimating the cable tension.

How Multibody Dynamics Simulation Technology is Used

RecurDyn is used to validate a computing algorithm for pulling a cable through an underground conduit. The cable is modeled as a flexible body and the stress profile and deformation are tracked over time. This model validates the simplified model and gives stress information in a dynamic environment that otherwise would be difficult to attain using physical testing.

Get This Paper

• http://link.springer.com/article/10.1007/s11044-013-9364-9

Related Case Studies

• A multibody-based dynamic simulation method for electrostatic actuators
• Modeling and dynamics analysis of helical spring under compression using a curved beam element with consideration on contact between its coils
• Dynamic analysis of beam type substrate handling robot in solar cell manufacturing
• Numerical modeling of journal bearing considering both elastohydrodynamic lubrication and multi-flexible-body dynamic