Dynamics and Control Research of Rotary Table Based on Virtual Prototype
Zifan Fang, Dexin Wu, Huapan Xiao, Hui Li, Kongde He, Weihua Yang, Intelligent Human-Machine Systems and Cybernetics (IHMSC) 5th International Conference, Hangzhou, August 2013, Volume 2, pp. 457-462.
-
Abstract
A rotary platform is studied in this paper. The control method of its electromechanical transmission system is studied by using virtual prototype technology and control technology. Virtual prototype model of rotary platform is established in the Gear subsystem of RecurDyn, Based on the Hertz elastic contact theory. A feed-forward link and three-ring control system which are position, speed and current control link are designed in Colink. And then, the mechanical and control simulation model is set up. The response of the typical position command signal is analyzed. The simulation results show that the control method has effective engineering application, and the method can satisfy the objective of engineering control, providing a reference for the design and analysis of other electromechanical transmission control system.
How Multibody Dynamics Simulation Technology is Used
A control method of a mechatronic transmission system is studied in this paper. The dynamic performance of the system was simulated in RecurDyn to demonstrate the effectiveness of the control method. The gear toolkit within RecurDyn simplifies the process of creating a model of a gear subsystem while CoLink provides a convenient built in method to test a control method directly on the virtual prototype.
Get This Paper
Related Case Studies
- Reduction of PTO rattle noise of an agricultural tractor using an anti-backlash gear
- Dynamic additional loads influencing the fatigue life of gears in an electric vehicle transmission
- Pose Tracking Control of an Omni-directional Wheel-type Robot for a Heavy-water Nuclear Reactor
- 3D Education System of DC Motor Drive using RecurDyn and CoLink