Abstract

In this paper, a PID controller is designed to solve position and orientation tracking control of a robot for a heavy-water nuclear reactor when the robot keeps track of a circular reference trajectory to show mobility for small turning radius. The four-wheel-drive robot is designed to have two omni-directional rear wheels for mobility and the tool center is located just above of the geometric center of the mobile base for stability. The complex nonlinear system dynamics of the omni-directional wheel-type robot is modeled with the RecurDyn. Using this dynamic model, a linear control theory based on a two wheel differential-drive robot is applied to design the robot controllers. The control strategy needs not only to keep track of a trajectory of a small radius, but also to locate the tools center to the proper position, with only position and orientation measurement. The co-simulation between RecurDyn and CoLink is built with the derived control strategy and some simulated results are presented.

How Multibody Dynamics Simulation Technology is Used

RecurDyn with the CoLink module can be used to design a PID controller. Errors can be easily tracked and corrected within RecurDyn. The dynamic response to the PID controller can be tracked over time to give feedback on the efficiency of the control strategy.

Get This Paper

• http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=6703949&url=http%3A%2F%2Fieeexplore.ieee.org%2Fxpls%2Fabs_all.jsp%3Farnumber%3D6703949

Related Case Studies

• 3D Education System of DC Motor Drive using RecurDyn and CoLink